# topic.topics[].topics[].topics[].label
EMV Character Timing For T=0 (Character Protocol)

# topic.topics[].topics[].topics[].label
EMV Character Timing For T=1 (Block Protocol)

# topic.topics[].topics[].label
Summary of Smart Card Interface Registers

# topic.topics[].topics[].topics[].label
SMCONV: Convention configuration register [2] (+0x40)

# topic.topics[].topics[].topics[].label
SMTXRETRY: Transmit retry limit [3] (+0x48)

# topic.topics[].topics[].topics[].label
SMRXRETRY: Receive retry limit [3] (+0x4C)

# topic.topics[].topics[].topics[].label
SMTXTIDE: Transmit FIFO tide mark [4] (+0x50)

# topic.topics[].topics[].topics[].label
SMTXCOUNT: Transmit FIFO count (R) / Flush (W) [4] (+0x54)

# topic.topics[].topics[].topics[].label
SMRXTIDE: Receive FIFO tide mark [4] (+0x58)

# topic.topics[].topics[].topics[].label
SMRXCOUNT: Receive FIFO count (R) / flush (W) [4] (+0x5C)

# topic.topics[].topics[].topics[].label
SMRXTIME: Receive/Read timeout [16] (+0x60)

# topic.topics[].topics[].topics[].label
SMICTRL: ICC control (write only) [3] (+0x6C)

# topic.topics[].topics[].topics[].label
SMATIME: Activation event timing [16] (+0x74)

# topic.topics[].topics[].topics[].label
SMDTIME: Deactivation event timing [16] (+0x78)

# topic.topics[].topics[].topics[].label
SMATRSTIME: Time to Start of ATR reception [16] (+0x7C)

# topic.topics[].topics[].topics[].label
SMATRDTIME: Maximum Duration of the ATR character stream [16] (+0x80)

# topic.topics[].topics[].topics[].label
SMCHTIME: Character To Character timeout [16] (+0x088)

# topic.topics[].topics[].topics[].label
SMCLKICC: External Smart Card clock frequency [8] (+0x8C)

# topic.topics[].topics[].topics[].label
SMCHGUARD: Character To Character Extra Guard Time [8] (+0x098)

# topic.topics[].topics[].topics[].label
SMBKGUARD: Block Guard Time [8] (+0x09C)

# topic.topics[].topics[].topics[].label
SMSYNCDAT: Synchronous Smart Card data [4] (+0xA4)

# topic.topics[].topics[].topics[].label
SMRAWSTAT: Raw I/O and clock status (read only) [2] (+0A8)

# topic.topics[].topics[].topics[].label
SMINTSTAT: Interrupt status (read/write) [11/9] (+0AC)

# topic.topics[].topics[].topics[].label
SMTESTCTRL: Test control register [9] (+0xB0)

# topic.topics[].topics[].topics[].label
SMACTTIME: Activation timer status (read only) [16] (+0xB4)

# topic.topics[].topics[].topics[].label
SMDATATIME: Data timer status (read only) [16] (+0xB8)

# topic.topics[].topics[].topics[].label
SMNBAUDCOUNT: Baud counter status (read only) [16] (+0xBC)

# topic.topics[].topics[].topics[].label
SMNVALUECOUNT: Value counter status (read only) [8] (+0xC0)

# topic.topics[].topics[].topics[].label
SMRXTIMESTAT: Rx timer status (read only) [16] (+0xC4)

# topic.topics[].topics[].topics[].label
SMTXRXSTATUS: TxRx status (read only) [8] (+0xC8)

# topic.topics[].topics[].topics[].label
SMINPUTCTRL: Primary Inputs Test Register [5] (+0xCC)

# topic.topics[].topics[].topics[].label
SMOUTPUTSTAT: Primary Outputs Test Register [10] (+0xD0)

# topic.topics[].topics[].topics[].label
SMSTBLCOUNT: Debounce (stable) Timer Status [8] (+0xD4)

# topic.topics[].topics[].topics[].label
SMSTATESTATE: Activation/Deactivation and TxRx State Machines Status [17] (+0xD8)

# topic.topics[].topics[].topics[].label
SMCLOCKCOUNT: Smart card clock divider status register [8] (+0xDC)

# topic.topics[].topics[].topics[].label
SMSTBCLOCK: Strobe clock generation register (read only) [0] (+0xFC)

# metadata.contentDescription
Datasheet providing key information for the AMBA Smart Card Interface.